Acrylic topcoat
Acrylic topcoat is a one-component coating composed of acrylic resin as the base material, plus plasticizers, pigment fillers and various additives. It dries quickly and can be applied at low temperatures. One-component packaging, easy construction. The paint film has good adhesion, is durable, and has a certain Anti-corrosion performance, good waterproofing. It is easy to maintain, and has good gloss and color retention.
Front matching:
chlorinated rubber primer, zinc-rich primer, epoxy primer, epoxy intermediate coat, etc.
The surface must be dry and clean before construction, free of any contaminants (grease, zinc salts, etc.)
ACRYLIC TOPCOAT
SCOPE OF APPLICATION
It is used for ships, offshore platform facilities, railways, highway bridge steel structures, mechanical equipment anti-corrosion decoration, large vehicles, train carriages, locomotive heads, transportation facilities, machine tools, instruments, meters, etc.
PRODUCT INFORMATION
Acrylic resin is used as the base material, and the plasticizer, pigment filler and various additives are used to form a one-component coating. It dries quickly and can be applied at low temperatures. One-component packaging, easy construction. The paint film has good adhesion, durability, certain anti-corrosion performance, and good waterproofness. It is easy to maintain, and has good gloss and color retention.
| Coating appearance | The coating film is flat and semi-glossy | ||
| Color | Various national standard colors | ||
| Drying time | Surface dry ≤ 0.5h (23 °C) Solid ≤12h (23 °C) | ||
| Adhesion | Level ≤1 (Grid) | ||
| The recommended number of coatings | Two coatings, dry film 80μm | ||
| Density | Approx. 1.3g/cm³ | ||
| Overcoat interval | |||
| Substrate temperature | 0℃ | 25℃ | 40℃ |
| Long time | 6h | 3h | 2h |
| Short time | No limit (no zinc salts formed on the surface) | ||
| Remark | When the post-coat is applied, the paint film should be dry, and the front paint film should not be polluted | ||
Front matching: chlorinated rubber primer, zinc-rich primer, epoxy primer, epoxy intermediate coat, etc.
The surface must be dry and clean before construction, free of any contaminants (grease, zinc salts, etc.)
Construction conditions: The substrate temperature must be higher than 3°C to prevent condensation.
Mix: Stir the paint thoroughly.
Dilution: An appropriate amount of supporting diluent can be added, stirred evenly, and adjusted to the construction viscosity.
The construction site should have a good ventilation environment to prevent the inhalation of solvent gases and paint mist. The product should be
kept away from the heat source, and smoking is strictly prohibited on the construction site.
Eyes: If paint splashes into your eyes, rinse immediately with plenty of water and seek medical attention.
Skin: If the skin is stained with paint, rinse with soap and water or use an appropriate industrial cleaner, do not use large amounts of solvents or thinners.
Inhalation or inhalation: due to inhalation of a large amount of solvent gas or paint mist, it should be immediately moved to a fresh place of air, loosen the collar, and let it gradually recover. f ingested with paint, seek medical attention immediately.
Storage: It must be stored in accordance with national regulations, the environment is dry, ventilated and cool, and high temperature and far away from the fire source.
Storage validity: 12 months, after which it should be used after passing the inspection
Packing: 20KG/barrel
