Epoxy floor paint
Epoxy floor paint is a two-component coating composed of epoxy resin, modified epoxy curing agent, pigment filler, additives, etc.
Through the two-component cross-linking reaction, the coating has high hardness, wear and impact resistance, and good toughness. It is highly resistant to many chemicals and oils, ensuring that the coating film is not corroded.
The coating has no joints, is smooth and clean, uniform in color, dustproof and leak-proof.
EPOXY FLOOR PAINT
REASON FOR SELECTION
SCOPE OF APPLICATION
Widely used in hardware, electronics, machinery industrial plants; Automobile, electronics, food, electric power, chemical floor construction.
PRODUCT INFORMATION
Epoxy floor paint is a two-component coating composed of high-quality epoxy resin, modified epoxy curing agent, salt filler, additives, etc. It is highly resistant to many chemicals and oils, ensuring that the coating film is not corroded. The coating has no joints, is smooth and clean, uniform in color, dustproof and leak-proof.
| Coating appearance | The coating film is flat and smooth | ||
| Color | Adjust according to customer requirements | ||
| Tensile strength | ≥25 | ||
| Flexural strength | ≥26 | ||
| Impact strength | ≥0.4 | ||
| Compressive strength | 5:1(Weight Ratio) | ||
| Adhesion | Level ≤1 (Grid) | ||
| The recommended number of coatings |
Two coatings, dry film 80-100 μm | ||
| Density | Approx. 1.1g/cm³ | ||
| OVERCOAT INTERVAL | |||
| Substrate temperature | 5℃ | 25℃ | 40℃ |
| Time of use | 6h | 4h | 2h |
| Repaint time | 48h | 24h | 12h |
| Remark | 1. Before applying the post-coating, the front-end coating film should be dry withoutany pollution. 2. It is not suitable for construction in rainy days, foggy days and relative humidity greaterthan 80%. 3. Wash the tool with thinner before use to remove any water that may exist. |
||
Process flow: base treatment – closed primer – flat in the mortar – grinding and dust removal – top coating.
Construction conditions: the temperature of the substrate must be higher than the dew point of 3 °C, and when the temperature of the substrate is lower than 5 °C during outdoor construction, the curing reaction of epoxy resin and curing agent will stop, and construction should not be carried out.
Mixing: Component A should be stirred evenly first, and then component B (curing agent) should be added to mix, stir thoroughly, and it is recommended to use a power stirrer.
Dilution: After mixing evenly and fully curing, you can add an appropriate amount of supporting thinner, stir evenly, and adjust to the construction viscosity before use.
The construction site should have a good ventilation environment to prevent the inhalation of solvent gases and paint mist. The product should be kept away from the heat source, and smoking is strictly prohibited on the construction site.
Eyes: If paint splashes into your eyes, rinse immediately with plenty of water and seek medical attention.
Skin: If the skin is stained with paint, rinse with soap and water or use an appropriate industrial cleaner, do not use large amounts of solvents or thinners.
Inhalation or inhalation: due to inhalation of a large amount of solvent gas or paint mist, it should be immediately moved to a fresh place of air, loosen the collar, and let it gradually recover. f ingested with paint, seek medical attention immediately.
Storage: It must be stored in accordance with national regulations, the environment is dry, ventilated and cool, and high temperature and far away from the fire source.
Storage validity: 12 months, after which it should be used after passing the inspection.
